A solid titanium bracelet for the Garmin Venu X1. The Venu X1 is unusual in the Garmin line-up:
instead of the proprietary QuickFit mount used on Fenix, Epix and Forerunner models, it takes a standard
24mm quick-release spring bar (confirmed in Garmin's own Venu X1 manual). This bracelet is built
to that exact spec: brushed TA1 titanium (99.5%+), three-link construction, quick-release spring bars and a hidden
folding clasp — a proper metal upgrade over the stock ComfortFit nylon band, at roughly 76 g.
Why a dedicated Venu X1 band
Most Garmin bands sold online are QuickFit and will not seat on the Venu X1 at all; most generic 24mm bands are
folded steel with hollow end links. This is a solid-link TA1 titanium bracelet cut to a true 24mm, with standard
quick-release bars that drop straight into the Venu X1 lugs — no adapters, no tools, no gap.
Key Features
-
Made for Garmin Venu X1 — standard 24mm quick-release spring bars, the exact mount
Garmin specifies for this watch.
-
TA1 pure titanium (99.5%+) — corrosion-proof, hypoallergenic, roughly 40% lighter than
stainless steel; the same material as the Venu X1's own titanium caseback.
-
Three-link bracelet — brushed titanium silver with polished bevels.
-
Hidden folding clasp — butterfly clasp closes flush into the bracelet, flat on the wrist.
-
Removable links — size it yourself with the included pin tool.
-
Not a QuickFit band — the Venu X1 does not use QuickFit; see the note below.
Specifications
| Compatibility |
Garmin Venu X1 (all colours) — standard 24mm quick release |
| Lug width |
24mm (standard quick-release spring bars) |
| Material |
TA1 / Grade 1 pure titanium (99.5%+) |
| Finish |
Brushed titanium silver |
| Construction |
Three-link bracelet, removable links |
| Clasp |
Hidden folding (butterfly) clasp |
| Weight |
Approx. 76 g |
| Fits wrists |
Approx. 145–215 mm out of the box, adjustable by removing links |
| Includes |
1 x titanium band, 1 x link removal tool |
| Brand |
LDFAS |
Quick release is not QuickFit — they do not interchange
Garmin QuickFit is a proprietary system used on Fenix, Epix, Enduro, Instinct and Descent models.
The QF lug is wider and slotted, with a latch moulded into the case; a standard quick-release spring bar does not seat
in it. The Venu X1 is the exception: Garmin switched it to a standard 24mm quick-release mount, so it
takes conventional 24mm bands like this one — and, equally, QuickFit bands made for other Garmin watches
will not fit the Venu X1.
Does NOT fit
- Garmin Fenix / Epix / Enduro / Instinct / Descent (QuickFit mount)
- Garmin Forerunner 965 / 970, Venu 2 / 3 / 4 (22mm or 20mm quick release — wrong width)
- Any watch without 24mm lugs and standard spring bars
FAQ
Q: The Venu X1 is a Garmin — doesn't it use QuickFit?
A: No. Garmin's Venu X1 manual specifies standard 24mm quick-release bands. QuickFit bands from Fenix/Epix lines
will not lock into the Venu X1.
Q: Will it fit a Venu 3 or Venu 4?
A: No — those use 22mm quick release. This band is 24mm, cut for the Venu X1 only.
Q: Can I adjust the length?
A: Yes. Links are held by friction pins; push them out with the included tool and remove links as needed.
Related
Compatibility
Fits Garmin Venu X1 only (standard 24mm quick-release spring bars). Not compatible with Garmin QuickFit models
(Fenix, Epix, Enduro, Instinct, Descent), Venu 2/3/4 (22mm), or any watch without 24mm standard lugs.
