LDFAS 26mm Quick Release Titanium Watch Band - 3-Link Bracelet with Hidden Clasp

Oversized 26mm titanium bracelet for 47mm cases. A solid titanium bracelet for any watch with 26mm lugs: brushed TA1 titanium (99.5%+), three-link construction, quick-release spring bars and a hidden folding clasp. It is the same bracelet we build for flagship smartwatches, minus the model-specific connector — two standard 26mm spring bars, and it drops straight into any 26mm lug.

Why 26mm matters

26mm bracelets are rare, and the watches that need them are big: a 47mm Luminor on a steel bracelet is a 200 g combination. Titanium at roughly 85 g changes how the watch sits on the wrist. COROS also uses a standard 26mm quick release on the VERTIX 2 / 2S, so this band fits those too.

Watches that use 26mm lugs

• Panerai Luminor 1950 47mm
• Panerai Radiomir 1940 47mm
• COROS VERTIX 2 / VERTIX 2S
• Other 47mm+ cases measuring 26mm between the lugs

Measure the distance between the lugs on your watch before ordering: it is the only number that matters, and it is not the same as the case diameter.

Key Features

• TA1 pure titanium (99.5%+) — the grade used across the LDFAS range: corrosion-proof, hypoallergenic, and roughly 40% lighter than stainless steel.
• Standard quick-release spring bars — swap the band on and off without a tool, and use any 26mm band you like later.
• Three-link bracelet — brushed titanium silver with polished bevels; the classic sports-bracelet proportion that reads as an original, not an add-on.
• Hidden folding clasp — the butterfly clasp closes flush into the bracelet, so the underside stays flat on the wrist and does not catch on sleeves.
• Removable links — size it yourself with the included pin tool; extra links are available from us if you need more length.
• Not a QuickFit band — this is standard quick release. See the compatibility note below.

Specifications

Quick release is not QuickFit — they do not interchange

Garmin QuickFit is a proprietary system. The QF lug is wider and slotted, with a latch moulded into the case; a standard quick-release spring bar does not seat in it and the band will not lock. A matching number does not mean a matching fit: a 22mm quick-release band is not a QuickFit 22mm band, and a 26mm band is not a QuickFit 26mm band.

This bracelet uses standard quick-release spring bars (the little levers on the back). It fits watches that take a conventional spring bar in the lug — mechanical watches and most smartwatches. If you are buying for a Garmin Fenix, Epix, Enduro, Instinct or Descent, shop the dedicated LDFAS QuickFit range instead: Garmin QuickFit bands.

Fitting notes

• Straight ends, not curved. On a case with curved lugs there will be a small gap at the end link. That is normal for any straight-end bracelet and does not affect security.
• Drilled lugs make it easier. If your watch has drilled lug holes, use them with the quick-release bars for a faster fit.
• Finish matching. Brushed titanium is deliberately softer than polished steel; on a polished case it will read as a slightly different texture, which is the honest look of titanium rather than a colour mismatch.

FAQ

Q: Will this fit my Garmin Fenix / Epix / Enduro?
A: No. Those use Garmin QuickFit, which is a different mount. Please use our QuickFit range.

Q: How do I know my lug width?
A: Measure the inside distance between the two lugs where the band meets the case, in millimetres. If it reads 21.5, you need the 22mm band — always round up, never down.

Q: Can I adjust the length?
A: Yes. Links are held by friction pins; push them out with the included tool, remove a link, and reinsert. Most people remove two or three links for a 170mm wrist.

Q: What if it does not fit?
A: We offer a 30-day return and exchange window. Send us a photo of the fitting and we will sort out sizing or a refund.

Other widths

• 21mm titanium quick release band
• 22mm titanium quick release band
• 23mm titanium quick release band
• 24mm titanium quick release band

Related

• All quick release bands
• Find the right band for your watch